Skip to content
Solutions · Physical AI & Robot Data

Humanoid Robot Training Data and Teleoperation

Humanoid data collection for robot learning, recorded by teleoperating the Unitree G1 in stationary and loco-manipulation tasks with grippers or dexterous and tactile hands. Every episode pairs camera views, depth, joint states and actions on one clock, delivered in LeRobot format as ready-made data or custom collection.

Book a Humanoid Data Strategy Session Free 30-minute call · mutual NDA included
G1Unitree G1 teleoperation, standing and walking.
TactileGrippers or dexterous and tactile hands, plus force-torque where needed.
LeRobotDelivery format, with MCAP, HDF5 and RLDS on request.
Embodiments and Hands

Embodiments and Robot Hands We Record With

Our Unitree teleoperation runs on the G1, a humanoid robot made by Unitree, with the Dex1 gripper, tactile hands or the Dex3, Inspire or BrainCo Revo 2 hands fitted to your task, so every episode matches the robot your policy will run on.

G1, stationary

The G1 holds its stance at a counter, table or shelf while the operator drives its arms, waist and hands.

G1, loco-manipulation

The operator drives walking and manipulation together, so one episode can cross a room and stock a shelf.

Dex1 gripper

Unitree's Dex1-1 gripper for pick-and-place, packing and tool handling, with one open and close action per hand.

Dex3, Inspire and BrainCo Revo 2 hands

Multi-finger hands for in-hand grasps and fine work, with contact recorded where the hand carries tactile sensors.

Two-arm tabletop rigs

Bimanual tabletop arms run on the same pipeline, and our teleoperation and capture services page covers them.

Matched to your task

We match gripper or hand to the objects and grasps in your task list before the pilot.

Two Humanoid Modes

Stationary and Loco-Manipulation Tasks

Humanoid teleoperation on the G1 runs in two modes. In stationary episodes the robot keeps its footing while the operator works its upper body. In loco-manipulation episodes walking and manipulation share one episode, so the policy learns to move to the work and then do it. What each mode records:

1 Stationary episodes record head and wrist camera views, depth, upper-body and hand joint states and commanded actions.
2 Walking episodes add leg joint states and the robot's path through the scene.
3 Both modes carry tactile and force-torque streams where the hands and program call for them.
Task Families

Kitchen, bedroom and staged retail tasks, plus your own.

Our ready-made data mostly covers kitchen, bedroom and staged retail tasks. Custom programs follow your task list, written as the objects, actions and success conditions your policy is evaluated on.

Kitchen, bedroom and staged retail task families
Custom tasks written to your evaluation
Standing or walking, chosen per task
Per-Episode Streams

What Each Humanoid Episode Holds

Each episode is one synchronized recording of a task, from what the robot saw to what the operator commanded. Streams are agreed per program.

RGB video

Head camera views of the scene, the hands and the objects, the view a policy sees from the robot.

Depth

Metric per-frame depth, so positions and distances in each episode come out at true scale.

Wrist cameras

Left and right wrist views, the close-up perspective a robot has at execution time.

Joint states

Positions for the arms, waist and hands at every step, plus the legs in walking episodes.

Actions

The commands the operator sent at each step, the targets a policy learns to reproduce.

Tactile and force-torque

Contact force from tactile hands and force-torque readings where the hardware carries them. Our tactile manipulation data page covers that capture in depth.

Hands and Grippers

Dexterous Hand Teleoperation Data

The end effector on the G1 determines what each episode records about the hands. We record with the Dex1 gripper, tactile hands and the Dex3, Inspire and BrainCo Revo 2 hands, and the one you choose sets how many hand values every step carries.

Dex1 gripper

Unitree lists the Dex1-1 gripper, which fits the G1, with an adjustable gripping force of 5 to 120 N and a 90 mm stroke. A gripper adds one open and close value per hand, which keeps the action space small.

Dex3

Unitree lists 7 degrees of freedom on the Dex3-1, three in the thumb and two each in the index and middle fingers, plus 33 pressure sensors in nine tactile arrays across the palm, finger pads and fingertips.

Inspire RH56

Inspire Robots lists its RH56DFX five-finger model at 6 degrees of freedom across 12 joints, with absolute position and force sensors that give real-time force feedback.

BrainCo Revo 2

The Revo 2 is the BrainCo hand we record with. BrainCo lists it at 11 degrees of freedom, 6 of them active, documents mounting it on the Unitree G1 and adds a fingertip tactile module on its Touch version.

Tactile hands

Hands fitted with tactile sensors add contact readings to every step, on the same clock as the cameras and joint states, with force-torque streams where the program calls for them.

What Finger Joints and Contact Readings Add

Finger joint states record how the hand closes, opens and regrasps an object through the episode, so a policy learns grasp shape along with arm motion. Contact readings show when each finger touches the object and how hard it presses, which helps a policy learn grip force on soft or slippery items and tell a secure grasp from one that is slipping.

How Hand Choice Changes the Action Space

A gripper adds one open and close value per hand to each action. A multi-finger hand adds a target for every actuated joint, which by the makers' figures means seven per hand on the Dex3-1 and six on the RH56DFX and the Revo 2. Two hands double those counts, and the state and action vectors in each delivered episode grow to match. We agree the end effector with you before the pilot, so every episode in a program shares one action space.

Tabletop and Walking Modes

Hand choice applies in both G1 modes. In stationary tabletop episodes the robot holds its stance at a counter or table while the hands do the work. In loco-manipulation episodes it walks to the work first, and the hand streams record alongside the leg joints.

Ready-Made G1 Sets

Our ready-made G1 sets cover kitchen, bedroom and staged retail task families, the staged retail episodes recorded with real teleoperation in a mock store set. Each set is a humanoid dataset of real G1 episodes, licensed non-exclusive, and a representative sample pack is available on request with the same modalities, calibration and delivery format. Teams post-training GR00T N1 on these episodes can see how each one maps to the model's inputs on our GR00T fine-tuning data for the Unitree G1 page.

Compare the Setups

Stationary Humanoid, Loco-Manipulation and Tabletop Arms Compared

Each setup records a different action space and suits different tasks.

SetupStationary humanoidLoco-manipulationBimanual tabletop arms
What is recordedHead and wrist camera views, depth, upper-body and hand joint states and commanded actions, plus tactile and force-torque where fittedEverything in a stationary episode, plus leg joint states and the robot's movement through the sceneWrist and scene camera views, joint states for both arms, gripper or hand states and commanded actions
Action spaceArm, waist and hand joints, with the legs holding a stanceThe whole body: legs, waist, arms and hands. Unitree lists the G1 at 23 joint degrees of freedom, and up to 43 in configurations with hands and optional waist and wrist jointsThe joints of two fixed-base arms, plus each gripper or hand
Typical tasksCounter and table work such as picking, placing, sorting and handing over objectsTasks that span a room or aisle, such as fetching an item, tidying a bedroom or stocking a shelfTwo-handed tabletop work such as folding, packing, kitchen prep and assembly
What makes episodes harder to collectFine finger control on multi-finger hands and consistent scene resets between episodesBalance and walking run alongside manipulation, scenes are larger to reset and each episode covers more groundTiming two arms together, handovers between hands and deformable objects such as cloth
Licensing Options

Ready-Made Humanoid Data and Custom Collection

Ready-made data covers real-robot episodes on the G1, bimanual tabletop arms and UMI handheld capture, mostly kitchen, bedroom and staged retail tasks. If you need a Unitree G1 dataset before your own program is scoped, it gives your team real episodes to train and evaluate on. How the ready-made terms work:

1 Licensed non-exclusive, so other teams can license the same episodes.
2 Sublicensable to your own client, for teams that build models for others.
3 Delivered in LeRobot format, with MCAP, HDF5 and RLDS on request.
Custom Collection

Recorded to your tasks, on the terms you choose.

Custom collection runs on non-exclusive or exclusive terms. Exclusivity covers the data and its resale rights, separate from the robot that recorded it. Exclusive terms are priced above non-exclusive, and term and scope are agreed once the pilot is defined.

Non-exclusive or exclusive terms
Exclusivity covers the data and its resale rights
Term and scope set once the pilot is defined
Delivery

Delivery Formats and Episode Records

Episodes ship in LeRobot format, with MCAP, HDF5 and RLDS on request, so they load into the training stack your team already runs.

LeRobot by default

Camera streams, joint states and actions are packaged as LeRobot episodes, ready for policy training.

MCAP, HDF5 and RLDS on request

For teams whose loaders, replay tools or storage expect them, agreed with you in scoping.

Provenance and consent records

Every episode carries provenance and consent records, with signed participant and site agreements permitting commercial training and a chain of custody you can audit.

Scoping

What Shapes the Engagement

We scope every humanoid program against these eight factors with you, then quote the program as a whole.

1

Embodiment and hands

The G1 or bimanual tabletop arms, with grippers or dexterous and tactile hands.

2

Tabletop or locomotion

Stationary work at a counter or table, or loco-manipulation between stations.

3

Tasks and environments

Task list, objects and settings, from kitchen, bedroom and staged retail families to tasks written for your evaluation.

4

Streams and format

Which camera, joint, tactile and force-torque streams each episode carries, and the delivery format.

5

Episode length

How much of a task one episode covers, from a single grasp to a multi-step routine.

6

Acceptance and QC criteria

What counts as a reject, such as a dropped object, a collision, a stream out of sync or an incomplete task.

7

Pilot size

How many episodes and task variations the pilot covers, so your team can train and evaluate on it.

8

Exclusivity and sublicense rights

Non-exclusive, sublicensable ready-made data, or custom collection on non-exclusive or exclusive terms.

Start Today

Have a Humanoid Task to Record?

Send us the task, the environment and the hands your policy needs. We'll scope a pilot with the same streams, calibration and format you'd get at scale, so your team can check the episodes first.

Book a Strategy Session →
Ask us about
Standing and walking episodes on the G1
Grippers or dexterous and tactile hands for your objects
Ready-made kitchen, bedroom and staged retail episodes
Custom collection on non-exclusive or exclusive terms
LeRobot delivery, with MCAP, HDF5 and RLDS on request
Acceptance criteria and reject rules set in the pilot
Questions

Frequently Asked Questions on Humanoid Data Collection

Both. Stationary episodes keep the G1 at a counter, table or shelf and record its arms, waist and hands. Walking episodes add the legs, so the robot moves to the work and completes it within one episode. One program can mix both modes across its task list.

It depends on the objects and grasps in your task list. Parallel grippers suit pick-and-place, packing and tool handling, and they keep the action space small. Dexterous and tactile hands suit in-hand regrasping, fine assembly and soft objects, and they add finger joints and contact readings to each episode. We agree the end effector with you before the pilot.

Ready-made data is licensed non-exclusive, and you can sublicense it to your own client. Custom collection runs on non-exclusive or exclusive terms. Exclusivity covers the data and its resale rights, separate from the robot used to record it, and exclusive terms are priced above non-exclusive. Term and scope are agreed once the pilot is defined.

LeRobot by default, with MCAP, HDF5 and RLDS on request. Every episode carries its streams on one clock, with provenance and consent records alongside.

We write them with your team before the pilot runs. Each task gets a success condition and a list of rejects, such as a dropped object, a collision, a stream out of sync or an incomplete task. Episodes go through human verification against those criteria, and the same rules carry into scaled collection once your team has evaluated the pilot.

Real-robot episodes on the G1, bimanual tabletop arms and UMI handheld capture, mostly kitchen, bedroom and staged retail tasks, licensed non-exclusive and sublicensable to your own client.

Scope Your Humanoid Robot Training Data

A 30-minute strategy call. Tell us the embodiment, hands and tasks, and we'll scope a humanoid data collection pilot with the streams, format and acceptance criteria your team needs.

Discuss Your Project